Hand Tools & Tool Accessories

BLADE FOR MR3 AIR GATE CUTTER 5/32″ BLADE OPENING

FLAT BLADE FOR MR3 AIR CUTTER 5/32″ BLADE OPENING

BLADE FOR MR10 AIR GATE CUTTER 13/64 BLADE OPENING

FLAT BLADE MR10 AIR CUTTER 13/64 BLADE OPENING

BLADE FOR MR20 AIR GATE CUTTER 3/8″ BLADE OPENING,

FLAT BLADE FOR MR20 AIR CUTTER

BLADE FOR MR30A AIR CUTTER 5/8″ BLADE OPENING

9/16″ BRASS BRISTLE TUBE BRUSH 9″ OAL, .005 WIRE SIZE

13/16″ BRASS BRISTLE TUBE BRUSH 10″ OAL .005 WIRE SIZE

15/16″ BRASS BRISTLE TUBE BRUSH 10″ OAL, .005 WIRE SIZE

2″ BRASS COPPER CENTER BRUSH

3″ BRASS COPPER CENTER BRUSH

4″ BRASS COPPER CENTER BRUSH

1/4″ DRIVER FOR COPPER CENTER BRUSHES

1-1/4″ BRASS CIRCULAR FLARED END BRUSH

1-1/2″ BRASS CIRCULAR FLARED END BRUSH

2-3/4″ BRASS CIRCULAR FLARED END BRUSH

3″ BRASS CIRCULAR FLARED END BRUSH

BRONZE, 9″ LONG, GROOVED SERRATED CURVED NOSE PLIERS W/ PRIPOINT

BRONZE, 9″ LONG, SERRATED, POCKETED CURVED NOSE PLIERS W/ PRIPOINT

PRI-POINT 8″ BRONZE PLIERS OVAL, FLUSH W/ BLACK HANDLES

BRONZE PRIPOINT LONG NOSE, 9 SERRATED EDGE BLACK HANDLE

BRONZE, 6″ LONG, GROOVED SERRATED CURVED NOSE PLIERS W/ PRIPOINT

PRI-POINT 8″ BRONZE CUTTER OVAL, FLUSH WITH POSITIVE STOP

BRONZE, 6″ LONG, GROOVED SERRATED LONG NOSE PLIERS W/ PRIPOINT

BRONZE, 6″, SHEAR GRIP, SERRATED SHORT NOSE PLIERS W/ PRIPOINT

BRONZ, 6″, OVAL, GRIPPER, TOOTHED PLIERS W/ PRIPOINT

BRONZE, 8″, OVAL, GRIPPER, TOOTHED PLIERS W/ PRIPOINT

BLADE FOR HOLDER B (10 PER PACK)

CARBIDE BLADE FOR HOLDER B (10 PER PACK)

LEFT HAND BLADE FOR HOLDER B (10 PER PACK)

CARBIDE BLADE, ROTATES BOTH WAYS FOR BLADE HOLDER E

HOOKED BLADE REMOVES INSIDE/OUTSIDE BURRS AT SAME TIME

BLADE HOLDER FOR B10 BLADE

SPARE BLADE FOR E BLADE HOLDER (PACK OF 10)

5″ LOW COST GATE NIPPER FOAM CUSHION HANDLES

AIR GATE CUTTER, 5/32″ DIA CUT, 6-1/4″ OAL

AIR GATE CUTTER 8-1/2″ OAL

5″ CURVED BACK GATE CUTTER

6″ Curved Back Gate Cutter

6″ Flat Back Gate Cutter

6″ x 45 Degree Gate Cutter

6″ Concave Gate Cutter

6″ Convex Gate Cutter

6″ x 90 Degree Gate Cutter

7″ Curved Back Cutter

7″ Flat Back Gate Cutter

8″ FLAT BACK GATE CUTTER

4″ Oval Slim Super Gate Cutter, Flat Back with Stop

5″ Oval Slim Super Cutter, Flat Back with Stop

6″ CUTTER, OVAL, FLUSH, W/ STOP

6″ Slim Super Gate Cutter, Flat Back with Stop

7″ SLIM SUPER CUTTER W/ STOP

8″ CUTTER, OVAL SLIM BLADE FLUSH CUT W/ STOP

9″ CUTTER OVAL SLIM BLADE FLUSH

ANGLE BLADE FOR HEATED GATE NIPPER, 7/8″ BLADE LENGTH

END CUTTER BLADE FOR HEATED GATE NIPPER, 25/32″ BLADE LENGTH

HEAVY DUTY HEATED GATE NIPPER

Heated Gate Cutter With Extra Long Blade (1-1/16″ ), 6-1/2″ OAL

Heated Gate Cutter with Short Blade

SPARE HEATER, FOR HLB13/HAB170 HEATED GATE NIPPERS

SPARE HEATER, FOR HHD200 HEATED GATE NIPPER

TRANSFORMER FOR HEATED AND AIR GATE NIPPERS, 110 VOLT POWER

SPARE BLADE FOR FT601 KNIFE 5 PER PACK

100 PER BOX SPARE BLADES FOR FT601 KNIFE

SPARE BLADE FOR FT14 KNIFE (5 PER PACK)

100 PER BOX SPARE BLADES FOR FT14 HEAVY DUTY KNIFE

UNIVERSAL KNIFE BLADE 100 PER BOX(20 PKS OF 5 EA) RK4 & KF3 UTILITY KNIVES

13 PT SNAP OFF BLADES (5/PACK)

13 PT SNAP OFF BLADES 100 PACK

HEAVY DUTY BLADE FOR BHE4 BLADE HOLDER 10 PER PACK

10 Pk. BLADE FOR LEFT HANDED USERS

CURVED BLADE USE FOR BRASS OR CAST, HIGH SPEED BLADE (10 PER PACK)

.16 HOOK BLADE FOR DEBURRING (10 PER PACK) TOOL

BLADE TO DEBURR INTERNAL BURRS — .08″, 10 PER PACK

13 POINT SNAP OFF TRIM KNIFE WITH STAINLESS STEEL TRACK

13 POINT SNAP OFF TRIM KNIFE

HEAVY DUTY FLASH TRIMMER KNIFE

ANTI-FATIGUE CUSHION KNIFE BLACK, W/ SAFETY CAP

RETRACTABLE UTILITY KNIFE

PLASTIC MOLD TOOL, 24″ OAL,

PLASTIC MOLD TOOL, 12″ OAL, WITH LOOP AND 90 DEGREE HOOK

PLASTIC SCRAPER, 1″ X 14″ OAL, W/ 1/2″ AND 3/4″ RAD GAUGE

PLASTIC CHISEL, 2-1/2″ WIDE X 9″, OAL,

Safety No-Bounce Tapper, 1-1/4″ x 5″ x 12 oz Net Wt

6 OZ SAFETY NO-BOUNCE HA MMER

3″ LB MOLD HAMMER W/ TENITE TIP 2-1/8″ FACE DIA

NYLON TIP FOR 6OZ HAMMERS

TENITE TIP FOR 6OZ HAMMERS

NYLON TIP FOR 1″ LB HAMMERS

TENITE TIP FOR 1″ LB HAMMERS

NYLON TIP FOR 2 LB HAMMERS

NYLON TIP FOR 3″ LB HAMMERS

TENITE TIP FOR 3″ LB HAMMERS

Safety No-Bounce Tapper, 1-1/4″ x 8″ x 19 oz net wt

Safety No-Bounce Tapper, 1-3/4″ x 6″ x 27 oz net wt

Safety No-Bounce Tapper, 1-3/4″ x 8″ x 42 oz net wt

Safety No-Bounce Tapper, 1-3/4″ x 9-1/2″ x 49 oz net wt

6″ BARREL BRUSH SINGLE SPIRAL DOUBLE STEM 4-1/2″ OAL

BLADE REMOVES INTERNAL BURRS, CAN REACH INTO HOLE .08

1″ BRASS CONDENSER BRUSH 7-1/2″ OAL, 1/8″ NPT EXT THREAD

3/8″ BRASS CONDENSER BRUSH 7-1/2″ OAL, 1/8″ NPT EXT THREAD

1/2″ BRASS CONDENSER BRUSH 7-1/2″ OAL, 1/8″ NPT EXT THREAD

5/8″ BRASS CONDENSER BRUSH 7-1/2″ OAL, 1/8″ NPT EXT THREAD

3/4″ BRASS CONDENSER BRUSH 7-1/2″ OAL, 1/8″ NPT EXT THREAD

24″ EXTENSION FOR CONDENSER BRUSHES

36″ EXTENSION FOR CONDENSER TUBE BRUSHES

PUSH-LOK ASSEMBLY TOOL AND HOSE CUTTER

BRONZE, 6″ LONG, SUPER FLUSH WITH SET STOP

BRASS ROD KIT W/ 1-ROD & 1″ TIP

SPARE REPLACEABLE BRASS TIPS FOR STEEL ROD

BRONZE TOOL, 8″ LONG, 3/8″ OPENING WITH PRI-POINT

BRONZE TOOLS ONLY — MAGNETIC SIGN

5″ FLAT BACK GATE CUTTER

VARIETY PACK, PLASTIC MOLD TOOLS, 1″ EACH OF SCR14, SCR925 POKR, POKR12

1″ LB MOLD HAMMER W/ TENITE TIP 1-1/4″ FACE DIA

ALUMINUM HANDLE 5″ L X 1″, W X 3/4″ T WITH 2″ BRASS SCREWS

HEAVY DUTY BRASS SCRAPER INC: AL HANDLE, BRASS BLADE, 2″ BRASS SCREW

2″ LB MOLD HAMMER W/ TENITE TIP 1-1/2″ FACE DIA